WIN-WIN PACK shrink wrapping machine

2024-03-07

Maintenance methods of shrink wrapping machine

In fact, the contraction machine to create economic benefits for us at the same time, has been a considerable loss of its own.We should strictly carry out the maintenance work within the specified period, reduce the wear speed of parts, eliminate the potential trouble and extend the service life of the machine.Take you to understand next: shrink machine maintains secret.

1. Check the shrink machine regularly: after daily work, the blade must be cleaned and maintained with wire brush and film remover, and the moving parts must be lubricated frequently.Want to undertake omni-directional inspection regularly, should give discretion to change to the component with serious ageing degree.

2.Power value: we should pay attention to the label on the nameplate of the shrinking mach

3. the thermal shrinkage machine power environment: the work of ventilation and then power, shut down the power and then cut off.

4. environmental conditions: shrinking machine should be in the temperature - 10 ℃, 50 ℃, relative humidity is not more than 85%, no corrosive gas in the ambient air, no dust, no explosive dangerous environments.

5. location: the installation must be placed horizontally, to ensure the normal operation of the electric heat pipe, ensure its service life, if the network belt transmission machine due to the installation Angle is not good will lead to the deviation of the center.

6.shrinkage machine clean environment: heating strip, silicone strip to keep clean, do not stick to foreign bodies, so as not to affect the quality of sealing.