Common Faults and Solutions of Heat Shrink Wrapping Machine

2024-04-11

Common Faults and Solutions of Heat Shrink Wrapping Machine

The heat shrink wrapping machine is one of the commonly used equipment in the modern packaging industry, efficiently and quickly completing packaging tasks, thereby improving production efficiency. However, occasionally, some faults occur during operation, such as the inability to detect packaged items or the occurrence of ballooning during the packaging process, affecting the packaging effect. Below are two common faults and their solutions:

Common Fault 1: Unable to Detect Packaged Items

During the operation of the heat shrink wrapping machine, there are occasional instances where packaged items cannot be detected, leading to the inability to perform normal packaging work, thus disrupting the workflow.

**Solution:**

1. Check if the photoelectric eye of the heat shrink wrapping machine is obstructed;

2. Readjust the detection angle of the heat shrink packaging machine;

Common Fault 2: Ballooning During Packaging Process

If the heat shrink wrapping machine encounters this issue during operation, it indicates that there is air trapped inside the packaged item, and the solution is to release the air.

**Solution:**

1. Increase the number of air vents to accelerate the release of air from the shrink film;

2. Adjust the conveyor belt speed of the packaging machine to expedite air release;

3. Increase the temperature of the heat shrink wrapping machine to speed up the exhaust.

The above methods can effectively address the common faults of the heat shrink wrapping machine, ensuring the smooth progress of packaging work and improving production efficiency. During use, timely inspection of the equipment and implementation of corresponding measures can reduce the likelihood of faults, ensuring the stable operation of the production line.