Food wrapping machine film issues

2024-06-12

Here are the solutions for troubleshooting when the film is not sent out by the food wrapping machine:

1. Is there tape?

**Solution:**

- **Check the tape supply:** Ensure that there is enough tape in the machine. If the tape has run out, it needs to be replenished promptly.

- **Tape position check:** Verify that the tape is correctly installed in the machine, ensuring the tape head is not curled or stuck.

- **Tape quality check:** Inspect the tape for any damage or poor quality, and make sure the tape used meets the machine's requirements.

2. Is the film barrel tight enough?

**Solution:**

- **Check film barrel tension:** Ensure that the film barrel tension is appropriate; too loose or too tight can affect the film's output.

- **Adjust tension device:** If the film barrel is too loose, adjust the tension adjustment device on the machine to maintain proper tightness of the film barrel.

- **Check barrel installation:** Verify that the film barrel is installed correctly to avoid incorrect installation that could prevent the film from being properly fed out.

- **Clean the barrel and machine:** Clean the barrel and relevant machine parts to prevent dust or foreign objects from affecting the barrel's rotation and the film's output.

By checking and adjusting these two aspects, you can effectively resolve issues related to the film not being sent out by the food wrapping machine. If the problem persists, it is recommended to contact a professional technician for further inspection and repair.