Operation and debugging of thermal shrinkage envelop machine

2018-12-24

Now the thermal shrinkage envelop machine has been widely used in various industries, at the same time I believe that we will have some feeling in the use of equipment, the newly bought thermal shrinkage envelop machine, in the use of packaging products, will not debugging, shrinkage effect can not meet the requirements, so it will be very annoying.

Next, WIN-WIN PACK Cherry will talk about the adjustment operation of thermal shrinkable envelop machine. When receiving the thermal shrinkable envelop machine sent by the manufacturer, the first thing to do is to understand the basic operation of the device and all its functions.

Thermal contraction are not coated machine and other equipment, must be in place together the various aspects, to get good product shrinkage, chosen from the use of films, adjust the speed of film, for the size of the product to play several rows of vent, adjusting the time of the discretion of the cutter and the sealing and cutting, and so on are very important, be short of one cannot. Such as our common phone box. Are generally choose capsular contraction of POF film. POF film shrinkage is better. In terms of a vent, because mobile phone box. Play the rows of stomata. Play much bad instead. As to adjust the cutting knife and sealing and cutting time, is usually 1 to 2 cm taller than product sit is OK. Above is the operation and debugging of the front section sealing and cutting machine of the thermal shrinkage envelop machine.

Here to speak is heat shrinkable coated machine debugging, after a period of contraction furnace according to the thickness of the film to adjust temperature, wind speed, rotational speed. Also affect the effect of shrinkage. We'll take phone box. There are 15 or 19 thick film. Because the film is too thick will also affect the shrinkage effect. As for the middle position first transferred to a temperature of 150 degrees, wind speed, rotational speed and middle position and the outlet is to cooperate with each other. The product into the furnace to see film after contraction. Then slowly adjust according to actual situation. If not fully contraction speed slow down, if the film did not finish full expansion increases wind speed or temperature appropriately.

Perhaps many people will think, need adjustment where so much is too much trouble, in fact, after you fully grasp the regulation of the above methods are very simple to operate, each a product to your hand. Your brain is already command you what to adjust. So for you, it only takes a few minutes to adjust well. The shrinkage of the product is very beautiful, it will make you have a sense of accomplishment. For each product, when you need to adjust to what extent are clear in the heart, you'll find. All of the operation is a simple process. The next thing to do is a key to start. Heavy work will become very relaxed.