How to solve the three major faults of thermal shrinking machine

2019-01-22

Shrink packaging is currently one of the more advanced packaging methods in the international market, so it will increase the use rate of thermal shrinking machine.But once the thermal shrinking machine failure many people do not know what to do, encountered problems, do not be nervous, do not arbitrarily repair, or the results may be worse, here to teach you a few methods.

Generally speaking, there are three reasons for the failure of the thermal shrinking machine, the first case is that the hot-air blower does not work, the second case is that the conveyor network does not work, the third case is that the contraction chamber is not heated, after knowing these faults, how do we correctly solve it?Please read on.

1.There may be two reasons for the failure of the hot-air blower of the thermal shrinking machine. The first reason is that the hot air switch is damaged, and the second reason is that the motor is damaged.When the above situation occurs, remember to replace.

2.Thermal shrinking machine transmission network isn't likely to have five reasons.The first reason is conveying switch failure, the second reason is that control of motor speed control board is damaged, the third reason is potentiometer is damaged, the fourth reason is conveyor motor damage, when the above condition, remember to replace. The fifth reason is conveying mechanism gets stuck, can pass after checking the troubleshooting.

3.There may be five reasons why there is no heating phenomenon in the contraction chamber of the thermal shrinking machine.The first reason is the bad contact of the heating switch, which can be solved by changing the switch.The second reason is the indoor wire aging short circuit, can be solved by replacing the wire.The third reason is that the electric heat pipe is not connected or the electric heat pipe is damaged.The fourth and fifth reason is that the temperature control panel is damaged and the potentiometer is broken. Please remember to replace it.

If you want to know more about the type and characteristics of sealing and shrinking machine, you may consult WIN-WIN PACKAGING MACHINERY CO., LTD., thank you!