Seven precautions for installation of thermal shrinking machine

2019-01-25

  Now a lot of packaging industry can not be separated from the thermal shrinking machine, because the thermal shrinking machine can make the packaging more diverse, increasing the beauty of the product.But there are many businesses do not know how to buy back after the correct installation, the following to share some hot shrinkage machine installation attention matters:

  1. When the equipment leaves the factory, each machine is attached with a cable connecting the power supply, and the terminal lead part contains the identification symbol of the power supply. It must be properly connected after being clearly seen, so as to avoid the occurrence of electric shock accident.

  2. When the equipment is used for about three months, a comprehensive inspection should be carried out on the wiring of the contraction chamber, and replacement should be made according to the aging degree.

  3. Since the power consumed by the equipment itself is relatively large, the power input in the power supply must be greater than the power indicated on the trademark, so as not to burn out the circuit and electrical components.

  4. Attention should also be paid to the installation of equipment.

  5. Horizontal installation should be selected for installation. The reliability mentioned above is based on the fact that it must be firm and horizontal, otherwise the service life of the electric heat pipe will be shortened. For the machine conveyed by the network belt, the inclined installation will cause the conveyor belt to deviate from the center.

  6. Must choose safe and reliable ground condition to install, assure person safety to be first problem.

 7. It is a common mistake for many operators to cut off the power supply directly after the packaging work. The correct operation should be to turn off the heating switch first, let the conveying motor and fan motor continue to run for about 10 minutes, and then cut off the whole power supply.

  If you want to know more about the type and characteristics of sealing and shrinking machine, you may consult WIN-WIN PACKAGING MACHINERY CO., LTD., thank you!