Why should the thermal shrinking machine be checked and maintained regularly?

2019-03-05

We know that no product or device can stay healthy forever, but as long as we check and maintain them regularly, we can reduce their chances of getting sick and extend the time they stay with us.Why do you want to check and maintain the thermal shrinking machine regularly?

Some parts of the thermal shrinking machine is the need for regular maintenance physical examination, then the thermal shrinking machine which is the need for regular inspection and maintenance?WIN-WIN PACK summarizes this for you:

1. We must regularly check some parts, such as: half a month or once a month, check the parts: worm gear, worm, lubrication block bolts, bearings and other moving parts, to see whether these parts are flexible rotation and wear, found defects should be promptly repaired, not forced use.

2. Secondly, the thermal shrinking machine should choose dry and clean indoor use, not in the atmosphere containing acid and other corrosive gas circulation places.

3. After the use of thermal shrinking machine should be taken out of the rotating cylinder for cleaning and brush off the remaining powder in the bucket, and then installed, ready for the next use.

4. Finally, if the packaging machine is not used for a long time, the whole body of the machine must be cleaned, the smooth surface of the machine should be coated with anti-rust oil, and the machine should be covered with a cloth. If the machine is not used for a long time, all parts must be checked before starting up.